Push-to-talk for production lines and maintenance

Air pressure drops at station four, a compressor trips on the night shift, the electrician is asleep at home. The line lead presses one key in gloves, maintenance answers at once, and a call wakes the electrician.

  1. Compressor 2, hall B: Compressor 2, hall B: stopped
  2. Line 2 lead: Air pressure is dropping at station four. We're pausing Line 2.
  3. Production desk: Copy. Maintenance One, compressor two in hall B, please.
  4. Duty technician: On my way. Two minutes.
  5. Duty technician: Overload has tripped, red lamp on. Resetting it.
  6. Duty technician: Running again. Pressure back in three minutes.
  7. Line 2 lead: Pressure is normal. Line 2 is running.

How PRIVOX helps

  • HALL B4 online
    LEAD-2 · TALKING

    One key, gloves on

    The line lead presses the hardware key on a rugged radio. Ear defenders stay on, and nobody leaves the station.

  • DISPATCH-1Production desk
    MAINT-1ON AIR
    ELEC-2REACHABLE

    Whoever is free answers

    A call for maintenance reaches every technician in the hall at once. The first one free answers, and the rest hear it.

  • GROUP CALLHALL B
    MAINT-1JOINED
    ELEC-2WAKING…
    LEAD-2RINGING

    Wake the electrician on call

    A call rings the electrician's phone at home, even with the app closed. The roster shows who can be woken.

  • Compressor 2, hall BStopped
    Indoor21.4 °C
    MainsOn

    The compressor raises the alarm

    A sensor reads the compressor's run signal. When it stops, the line and maintenance get one alarm on the hall channel.

Try it on the radio

The same interface, set up the way it could look for you: your channels, your callsigns, your sensor.

PTT
Inrico T320 — PRIVOX PTT
ptt.privox.tech/app
Typical radio8–12 h
Radio with PRIVOX21 h≈2× longer

PRIVOX is light on the battery. By the 5-5-90 cycle radio makers use to rate battery life, a radio running PRIVOX lasts about 21 h, while typical radios are rated at 8–12 h. Calculated from a full discharge test on an Inrico T320.

How we adapt to you

  • A channel per hall and trade

    Hall B, Line 2, maintenance and electricians each get a channel. The production desk hears all of them and talks into any.

  • Agency staff on a QR card

    Agency operators join with a personal QR card. They listen before they talk, and the account ends on its own date.

  • Server inside the plant

    Voice, chat and sensor data can stay in your own network, on your own server. Or we host it for you.

What we can add

  • A call that waits for an owner

    Each maintenance call stays open until a technician takes it. If nobody does in time, it goes to the shift supervisor.

  • Andon and MES stops on the channel

    We bring the stops your Andon or MES already records into the maintenance channel. One way: events come in, nothing goes back.

  • Shift handover summary

    At the end of the shift, open calls, repeated alarms and parts on order go to the incoming supervisor in one summary.

Sensors that work inside PRIVOX

Sensors plug into the same system and extend what it does: the alarm reaches the right radio and the console, someone accepts it, and it closes when the sensor is back to normal. For Manufacturing & factory shifts we recommend:

See these sensors at work

Start with one real site

We set PRIVOX up on one of your sites — with your people, your channels and your sensors — and agree up front what a good result looks like.

or write to eugene@privox.tech
  1. A 20-minute call

    We go through your sites, shifts and the alarms that matter most.

  2. A live demo on your devices

    Phones, radios and the console — on your site or remotely.

  3. A pilot on one site

    Your shift works on PRIVOX. Together we measure how fast alarms reach people and get an answer.